Here is the detailed presentation of our range of devices that will enable you to produce chlorine locally. Below you will also find information about our reagents to test the chlorine concentration of chlorine solutions and the residual chlorine in drinking water. Lastly, please see below for information about our technical training courses for water and sanitation professionals.
The devices
Mini-WATA™
Description
- Production time: 3 hours
- Production volume: 0.5 l of sodium hypochlorite concentrated at 6g/l
- Quantity of chlorine produced: 3 g of active chlorine
- Dimensions of the device: 13 x 3 x 2 cm
During each production cycle, the Mini-WATA™ can treat 2,000 l of water or produce 1.5 l of disinfectant for floors, latrines, etc.
Kit contents
- One Mini-WATA™ device
- One 5V/1A power supply
- One 50 ml syringe
- One production bottle
- One WataTest™ kit
- One WataBlue™ kit
- One pH test
- One user manual
Option: Solar power
WATA-Standard™
Description
- Production time: 2h30
- Production volume: 2 L of sodium hypochlorite concentrated at 6g/L
- Quantity of chlorine produced: 12 g of active chlorine
- Dimensions of the device: 15 x 6 x 5 cm
During each production cycle, the WATA-Standard can treat 8,000 L of water or produce 6 L of disinfectant for floors, latrines, etc.
Kit contents
- One WATA-Standard device
- One control box
- One 12V/5A power supply
- One 50 mL syringe
- One production bottle
- One WataTest kit
- One WataBlue kit
- One pH test
- One user manual
Option: Solar power
WATA-Plus™
Description
- Production time: 4 hours
- Production volume: 15 L of sodium hypochlorite concentrated at 6g/L
- Quantity of chlorine produced: 90 g of active chlorine
- Dimensions of the device: 34 x 18 x 8 cm
During each production cycle, the WATA-Plus can treat 60,000 L of water or produce 45 L of disinfectant for floors, latrines, etc.
Kit contents
- One WATA-Plus device
- One control box
- One 12V/29,2A power supply
- One 50 mL syringe
- Five WataTest kit
- Five WataBlue kit
- One pH test
- One user manual
Option: Solar power
Midi-WATA™
Description
- Production time: 4 hours
- Production volume: 30 L of sodium hypochlorite concentrated at 6g/L
- Quantity of chlorine produced: 180 g of active chlorine
- Dimensions of the device: 34 x 18 x 11 cm
During each production cycle, the Midi-WATA can treat 120,000 L of water or produce 90 L of disinfectant for floors, latrines, etc.
Kit contents
- One Midi-WATA device
- One control box
- One 24V/25A power supply
- One 50 mL syringe
- Five WataTest kit
- Five WataBlue kit
- One pH test
- One user manual
Maxi-WATA™
Description
- Production time: 4h30
- Production volume: 60 L of sodium hypochlorite concentrated at 6g/L
- Quantity of chlorine produced: 360 g of active chlorine
- Dimensions of the device: 34 x 18 x 11 cm
During each production cycle, the Midi-WATA can treat 240,000 L of water or produce 180 L of disinfectant for floors, latrines, etc.
Kit contents
- One Maxi-WATA device
- One control box
- One 24V/40A power supply
- One 50 mL syringe
- Five WataTest kit
- Five WataBlue kit
- One pH test
- One user manual
Solar module (optional)
Description
Solar panel with battery
- Capacity: up to 2 production cycles per day
- Power: 12 volts and 4 to 40 amperes
- Available on request for Mini-WATA™, WATA-Standard™ and WATA-Plus™
The reagents
WataTest™
Description
This reagent makes it possible to determine the concentration of active chlorine (Cl2, HOCL, OCL-) in any chlorine solution, in grams per litre, within a range of 1 to 7 g/l (0.1 to 0.7% of active chlorine and 0.32 to 2.23° Cl), with an accuracy of ± 0.5 g/l.
Kit contents
- One 50 ml bottle of WataTest™ reagent
- One 20 ml measuring spoon
- One 3 ml pipette
- One 1 ml syringe
- One user manual
WataBlue™
Description
This reagent is a colorimetric test to measure the residual chlorine level in accordance with WHO recommendations, namely between 0.5 and 1 ppm.
Kit contents
- One 14 ml bottle of WataBlue™ reagent
- One 5 ml syringe
- One test tube
- One user manual
Training
WATA™ technical training modules
This training provides technical support for your projects and will give you the confidence to use WATA™ technology independently. The training is designed to produce WATA™ technology experts, who will become the reference points for your project, community or health centre on how to use WATA™. This training is necessary in order to learn how to use WATA™ equipment professionally.
- Would you like to consider a large WATA™ project?
- Want to make sure your team members are able to use the different devices in the WATA™ range independently?
- Are you planning to install WATA™ technology in a network of health centres, schools or communities?
- Do you simply need to update your knowledge of how to use WATA™ devices and the associated control methods?
We offer a range of three training modules that can be combined with three standalone options. All our training is provided by an approved trainer who has been previously trained by our engineering team based in Geneva. Please contact us here for an estimate of the cost of a training course.
